Electromagnetic Flow Meters
M5000
DESCRIPTION
Designed, developed and manufactured under strict quality standards, the M5000 electromagnetic flow meter features sophisticated, processor-based signal conversion with accuracies of ± 0.4%. Based on Faraday’s Law of Induction, these meters can measure potable water, reclaimed water, ground water and clear, water-based applications that have minimal electrical conductivity. With no moving parts in the flow stream, there is no pressure loss. Also, accuracy is not affected by temperature, pressure, viscosity or density and there is practically no maintenance required. It is encased in an IP67 housing (optional IP68), which makes it a reliable meter even when submerged.
FEATURES
• Available in sizes 1/2…24 in. (DN 15…600)
• Battery powered, with battery life up to 20 years
• ± 0.4% of measured value ± 2 mm/s accuracy independent of fluid viscosity, density and temperature
• Unaffected by most solids contained in fluids
• LCD Display
• Pulsed DC magnetic field for zero point stability
• No pressure loss for low operational costs
• Corrosion resistant liners for long life
• Calibrated in state-of-the art facilities
• Integral and remote signal converter availability
• Optional grounding rings or grounding electrode
• Measurement largely independent of flow profile
• Low-power digital microcontroller (16 bit)
• Simple programming procedure
• Digital and infrared outputs
• Automatic zero-point stability
• Non-volatile programming
• NSF/ANSI/CAN 61 and 372, OIML, MID and AWWA C715 certified
• Data logging
• Verification device
• IP67/IP68 protection class
• Modbus RTU (RS232), IRDA, M-Bus, optional Modbus RTU (RS 485)
• BEACON®/AquaCUE® connectivity